INDEP Electronics & Photonics.                             INDEP In Science We Trust ! ...
Product Catalog
                                                                                       
The product catalog regards devices and modules serially manufactures and normally available on-stock. Please contact us for quotations, customizations or general inquiries. The following products have been thoroughly designed, developed and manufactures in ITALY by INDEP SRL. All the rights are reserved. No licenses to patents or other intellectual property of INDEP SRL are provided directly or indirectly by the Company in connection with the sale.
IDP-ILED42

Power LED illuminators with high efficiency. Anodized aluminium compact case, grey or black (upon request). Available several models supplied with built-in steady current generator. Several protection levels may be provided to preserve the illuminator from current overshoot, voltage overshoot, short circuits and polarity inversion. Available with light intensity trimmer, on-board or remote. Output illuminance greater than 20000lux measured at 300mm along the main axis, using lenses with aperture 20° and white LEDs
> High luminous flux
> Total electric protectoin
> Wide input voltage span
> Available with LED diodes with several colours and several optics
> Low cost

> High luminous flux
> Built-in steady current generator
> Wide input voltage span
> Knob for controlling the brightness
> Available with LED diodes with several colours and several optics
> Remote switch-off


> High luminous flux
> Built-in steady current generator
> Wide input voltage span
> Remote control of the brightness
> Available with LED diodes with several colours and several optics
> Remote switch-off


IDP-BLED300

Power LED industry illuminators with high efficiency. Anodized aluminium rugged  case, can be hooked without drilling. Available in different models and size with several type of protection. Light intensity can be set remotely. Available built-in steady current generator. Output illuminance greater than 24000lux measured at 300mm along the main axis, using lenses with aperture 20° and white LEDs.
> High luminous flux
> Built-in steady current generator
> Remote control of the brightness via control signal
> Available with different size: 12, 24, 36 LED diodes
> Available with LED diodes with several colours and several optics
> Remote switch-off

> High luminous flux
> Voltage control
> Fully protected
> Remote disabling
> Rugged structure
> Available with different size: 12, 24, 36 LED diodes
> Available with LED diodes with several colours and several optics

> High luminous flux
> Rigged structure
> Available with different size: 12, 24, 36 LED diodes
> Available with LED diodes with several colours and several optics

> Low cost
> High gain (transimpedence 100000 V/A)
> Wide bandwidth (14MHz)
> Low noise leve on the output signal (<2mVrms)
> Low cost

IDP1000

Photo Amplifiers (optical amplifiers) with small size and low cost. Main characteristic is the high gain i.e. 105 V/A       (+100dB) and the low noise level (less than 2mVrms on the output signal)
IDP240

Digital driver with high speep for laser diodes. Compact module that allow sampling frequency up to 120MHz and maximum total current up to 500mA. The AX version with a lower price, supplies smaller driven currents.
> Fast switching: Rise and Fall time < 2ns
> Programmable bias current from 0mA to 80mA
> Tunable modulation current from 0mA to 180mA
> Single voltage supply +5Vdc
> Control digital TTL input

> Fast switching: Rise and Fall time < 2ns
> Programmable bias current from 0mA to 160mA
> Tunable modulation current from 0mA to 350mA
> Single voltage supply +5Vdc
> Control digital TTL input

IDP500

These modules drive and control Peltier cells. Voltage supply +5V, maximum current  ±2.5A. Fan cooler of heat/sink are not necessary thanks to the embedded switching technology. This device, besides driving currents, integrates also a controller that can track the set temperature, thanks to an NTC.
> High gurrent TEC Driver TEC for warming or cooling (±1.0A)
> Nor fan cooler, nor heat sick are needed to cool down the module
> Integrated controller for a precise temperature traking
> Single voltage supply +5Vdc
> Compact size
> Low cost

> High gurrent TEC Driver TEC for warming or cooling (±2.5A)
> Nor fan cooler, nor heat sick are needed to cool down the module
> Integrated controller for a precise temperature traking
> Single voltage supply +5Vdc
> Compact size

Click image for product page
IDP-TR

These modules measure objects displacement using laser triangulation technique. Devices are available with different measurement ranges. All these instruments are rugged and very simple to use. Comunication to and from these devices is implemented by a RS422 or RS232 bus, using a very simple Ascii characters protocol. These modules are able to measure the distance also of poorly cooperative targets thanks to the high laser power. Laser radiation is automaticaly modulated by the device according to the diffusivity of the target.
> Measurement Range from 30mm to 180mm
> Adaptative control of laser power to 35mW
> Easy and fast characters communication protocol
> Available with RS232 or RS422 interface
> Rugged case
> Low cost
> Measurement Range from 20mm to 220mm
> Adaptative control of laser power to 35mW
> Easy and fast characters communication protocol
> Available with RS232 or RS422 interface
> Rugged case
> Low cost
> Measurement Range from 50mm to 300mm
> Adaptative control of laser power to 35mW
> Easy and fast characters communication protocol
> Available with RS232 or RS422 interface
> Rugged case
> Low cost
IDP-TSTROBE

Portable Strobo with power LEDs with built-in battery, 4500 lumen per pulse. Repetition frequency and pulse duration can be set. Rugged aluminium case.
> Flash with high light power
> Portable device with built-in battery
> Rugged case
> Setting of repetition frequnency and pulse duration
> High precision and stability

IDP-5150

Linear camera in oem version with 5150 pixel and speed up to 1000 frames/sec. Several built-in I/O:  RS422/485 lines, Encoder inputs, opto inputs, PhotoMos, A/D, NTC, Luxmeter. Compact dimensions and USB 2.0 High-speed interface.
> CCD Linear sensor 5150 pixel
> Programmable frame rate from 15 to 1000 fps
> Programmable gain from -9dB to +44dB
> Several built-in I/O devices
> Internal/External frame trigger
> Cameras in cascade for shared sync
> Master/Slave camera mode
> USB 2.0 High Speed Interface
> Libraries e Drivers included
> Small dimensions
SCIENCE...
RACING...
INDUSTRY...
ITA
ENG
IDP-RFD100K

Time of flight laser rangefinder with high speed sample rate: 100Ksps. High accuracy and repeatibility. It can measure also on not cooperative targets. The device can measure in a range over 8500mm.
> High acquisition rate (100000 samples/s T(acq) = 10us)
> High accuracy up to ±5mm
> High repeatibility up to ±0.2mm
> Measuring range over 8500mm
> Operation with not cooperating targets
> Rssi signal to evaluate target's albedo
> USB 2.0 High Speed Interface
> Usb driver and DLL libraries included
> Small dimensions
> Low power
> Sensor with 1024 pixel
> Resolution 10bit
> Programmable FrameRate from 0.37fps to 506 fps
> Programmable Exposure Time
> High Exposure Time resolution: 160ns steps
> High Frame Period resolution: 160ns steps
> Int/Ext Trigger Frame acquisition
> Edge or Level External Trigger
> Programmable output: Trigger repetition or Pulse
> USB 2.0 High Speed
> Software Lib and Driver included
> Reduced dimensions
> USB powered
> Low Cost
IDP-1024HM

Linear Camera in oem version with 1024 pixels. Maximum frame rate up to 506 frames/sec and programmable exposure time. USB 2.0 interface, reduced dimensions, high programmability, Low cost. Ext.Trigger and programmable output to synchronize external devices.
IDP-SERIES P4

The IDP Led P4 Series is characterized by reliability and easy to use. The P4 Series is given in different modules: Linear bars, circular boards or square boards. Possibility of UV or Visible leds.
> Wide selection of modules
> High power and efficiency
> Easy to use
> Series or parallel connections
> UV or Visible Led diodes
> Lenses available
> Wide selection of led drivers
> USB-RS485 converter, high speed up to 3Mbps
> Electrical isolation up to 1kV between USB and RS485
> ESD protection up to 15kV
> USB powered
> Hardware double buffer for RX-TX: 512bye + 512byte
> RS485 bus distance up to 1200 meters
> Up to 256 nodes
> Windows drivers with auto setup and Virtual Com
> Compact dimensions and DIN guide lock
> Low cost
> Led lamp with integrated dimmer
> Luminous intensity regulation on 256 steps
> Wide input voltage supply: from 6.5V to 30V
> Bus communication on RS485, up to 1200 meters and 256 nodes
> USB communication using an USB-RS485 converter (Virtual COM)
> Simple commands using character strings (ASCII)
> Manual function with push button without RS485 connection
> Save and reload of parameters with internal EEPROM
> Compact dimensions and DIN guide lock
> Low cost
> Three channels PWM dimmer with high efficiency
> Regulation on 256 levels (leds, lamps, resistive loads, etc.)
> High current: up to 12A
> Input voltage and load voltage from 6.5V to 30V
> Bus communication on RS485, up to 1200 meters and 256 nodes
> USB communication using an USB-RS485 converter (Virtual COM)
> Simple commands using character strings (ASCII)
> Save and reload of parameters with internal EEPROM
> Compact dimensions and DIN guide lock
> Low cost
IDP MINI-DIN

The Mini-Din modules are devices designed for led modules control, for industrial control and data acquisitions and domotics. The modules are  compact dimensions and given with a DIN guide lock for an easy installation into racks. The devices can be easly connected
on a RS485 bus (2 wire bus) to make a net with up to 256 nodes. Tipically the devices are controlled using a PLC or a PC.
The MINI-DIN family is composed of different models:

1) USB485ISO: USB to RS485 high reliability converter, with electrical isolation up to 1000V
and bus speed up to 3Mbps.

2) PWM3: Three channels pwm dimmer for leds, lamps and resistive loads control.

3) DIMLED4: High efficiency four led lamp with dimmable intensity.

Contact us for other modules.
IDP-BLUEDIM

The device is a bluetooth dimmer controller with 6 channel. It can communicate with devices equipped with Bluetooth as PCs, smartphones or tablets. The controller is equipped with internal memory and integrated lighting effects. The device is being supplied with a free software for Android.
> Bluetooth Dimmer with built in antenna
> 6 PWM independent channels to adjust luminous flux
> PWM regulation on 256 levels
> Working voltage from 6V to 30V
> Max. total current 12A
> Max. current per channel 4A
> Max. total power 360W
> Data retention without power supply
> Pre configured light effects programs
> Up to 64 luminous configurations to storage
> Up to 9 digit of PIN code for access protection
> Software for Android
> Small dimensions
> Low cost
IDP-BLUEDIM DAY

The device is a bluetooth controller dimmer 6-channel. It can communicate with PCs, smartphones and tablets. The control unit provides a normal operating mode, for the immediate control of the brightness, and a program mode, in which the user can define the time slots in which to insert effects of sunrise-sunset and / or adjustment of light intensity.
> Bluetooth Dimmer with built in antenna
> 6 PWM independant channels to adjust luminous flux
> PWM regulation on 256 levels
> Working voltage from 6V to 30V
> Max total current 12A
> Max current per channel 4A
> Max total power 360W
> Data retention without power supply
> Daily programming on 24 hours
> Programming time resolution of 1 minute
> Up to 32 programmable time slots for each channel
> Normal dimmer mode - real time light dimming
> Up to 64 luminous configurations to storage
> Up to 9 digits of PIN code for access protection
> Software fo Android
> Small dimensions
> Low cost
WITH DAILY PROGRAMMING
IDP-BLUEDIM

The device is a 3-channels bluetooth controller, able to communicate with devices equipped with bluetooth as  smartphones or tablets. The module is equipped with internal memory and integrated lighting effects. The device is supplied with free Android software. This device is the low cost version of our 6-channels   BLUE DIMMER.
IDP-BLUE  RELAY

The device is a bluetooth unit. It can control 4 relays (also in pulse mode). The board is able to communicate with devices equipped with Bluetooth as a smartphone, tablet or PC. The BLUE RELAY is equipped with non-volatile memory capable of preserving the state of the relays even in the absence of power.
> Bluetooth Device with built in antenna
>
4 relays (SPDT)
> Bistable or Monostable (Pulse) Mode
> Pulse duration: 1s ... 6550s
> Loads up to 10Ampers (110Vac or 220Vac)
> Power Supply voltage: 12V
> Max. current consumption: 250mA
> Retention of relay settings without power supply
> Automatic reading of the relays status by the software
> Ability to associate descriptive labels to the relays via software
> Up to 9 digit of PIN code for access protection
> Free Software for Android
> Small dimensions: 83.6x69.2x19.5 mm
> Low cost
> Bluetooth Dimmer with built in antenna
> 3 PWM independent channels to adjust luminous flux
> PWM regulation on 256 levels
> Working voltage from 6V to 26V
> Max. total current 9A
> Max. current per channel 3A
> Max. total power 230W
> Data retention without power supply
> Pre configured light effects programs
> Up to 64 luminous configurations to storage
> Up to 9 digit of PIN code for access protection
> Free Software for Android
> Small dimensions (58mm x 41mm x 21mm)
> Low cost